REQUIREMENTS FOR BUILDING PERMIT APPLICATION

Jobe Inspection Service, LLC

Certified Building Inspectors

P.O. Box 432 Delmont, Pa. 15626

(724) 468-6026 / Fax (724) 468-3897__

REQUIREMENTS FOR BUILDING PERMIT APPLICATION

Two (2) sets of building plans with the following requirements included:

(a) Floor plans of each level of construction

Measurements including scale shall be indicated on drawings.

(b) Elevations of all exterior views, including exterior materials to be ` used in construction.

(d) Plumbing, HVAC & Electrical plans

The following information shall also be included on all drawings:

Footer size

Height and thickness of all foundation walls

Framing of each floor- span, direction and member sizes

Framing of roof – span, direction and member sizes

Lintel and header sizes of all doors and windows

One (1) Plot Plan showing the following:

Front, side and rear yard setbacks

Dimensions of lot

All Easements and Right-of-Ways

Registered Surveyors Seal

Completed Building Permit Application

Completed Zoning Certification ( If Applicable)

Copy of Sewage Tap-In or On-Lot Sewage Permit

Copy of Energy Compliance Code the building is to be constructed to.

For your convenience please see web site below, this may be helpful in completing the Energy Compliance portion of the code.

www.energycodes.gov (RESCHECK/COMCHECK)

Definition

MANUFACTURED HOME: Manufactured home means a structure, transportable in one or more sections, which in the traveling mode is 8 body feet (2438 body mm) or more in width or 40 body feet (12 192 body mm) or more in length, or, when erected on site, is 320 square feet (30m2) or more, and which is built on a permanent chassis and designed to be used as a dwelling with or without a permanent foundation when connected to the required utilities, and includes the plumbing, heating, air conditioning and electrical systems contained therein; except that such term shall include any structure that meets all the requirements of this paragraph except the size requirements and with respect to which the manufacturer voluntarily files a certification required by the secretary (HUD) and complies with the standards established under this title. For mobile homes built prior to June 15, 1976, a label certifying compliance to the Standard for Mobile Homes, NFPA501, in effect at the time of manufacture is required. For the purpose of these provisions, a mobile home shall be considered a manufactured home.